It's a hardener used with two-component Acrifix reaction adhesives (2R series). Adding it in the recommended percentage starts the curing reaction and determines pot life and curing time.
An adhesive on its own doesn't always give you full control over the finished bond. That's where auxiliaries come in with supporting range of hardeners, moderators, and thinners that let you fine-tune how an Acrifix reaction adhesive behaves before and during curing.
Hardeners trigger the curing reaction in two-component adhesives. Moderators slow that reaction down when you need more working time. Thinners adjust viscosity, either for light dilution or for significantly reducing thickness, and they're also used to clean adherend surfaces before bonding. And when the adhesive itself needs to disappear visually into the finished piece, Acrifix colorants let you tint the bond line to match the surrounding acrylic sheet.
Used correctly, these auxiliaries give fabricators far more precision over bond strength, working time, and finished appearance than the base adhesive alone could offer. Kapoor Plastics carries the complete Acrifix auxiliaries and colorants range, supplied genuine and ready for bulk order.
| Product | Function | Used With |
|---|---|---|
| Acrifix CA 0020 | Hardener that triggers curing in 2-component adhesives | 2R 0190, 2R 0195, 2R 1200, 2R 2019 |
| Acrifix MO 0070 | Reaction moderator — extends working time | 2R 0190 |
| Acrifix TC 0030 | Thinner for light dilution (≤10%) and adherend cleaning | All polymerization adhesives |
| Acrifix TH 0032 | Thinner for heavier dilution (>10%) | 2R 0190 |
| Acrifix CO Colorants (Black, White, Red, Blue, Yellow) | Coloring agent to match adhesive to sheet color | 2R 0190, 2R 0195, 2R 1200, 2R 2019 |
Product selection depends on which Acrifix adhesive you're working with. Contact us to confirm the right combination.
It's a hardener used with two-component Acrifix reaction adhesives (2R series). Adding it in the recommended percentage starts the curing reaction and determines pot life and curing time.
Yes. Acrifix CO colorants come in black, white, red, blue, and yellow, and can be mixed into compatible 2-component adhesives so the finished bond line blends with the sheet material.
TC 0030 is used for lighter thinning, up to about 10%, and also works as an adherend cleaner. TH 0032 is formulated for thinning beyond 10% when a more significant viscosity reduction is needed.
No. Acrifix MO 0070 is used specifically when you need to slow down the reaction time on Acrifix 2R 0190, giving you more working time before the adhesive sets.
Yes, Kapoor Plastics supplies the full auxiliaries and colorants range in bulk quantities to fabrication units and trade buyers across India.